Talon Tunes 580cc Carbon Fiber Bottle 300Bar with Ninja Regulator PCP Use ONLY

  

Talon Tunes 580cc Carbon Fiber Bottle with Ninja 4500PSI Regulator. Regulator is fixed output pressure of 3000PSI (although I found it was closer to 2800psi). NO Gauge ON Regulator as seen in picture. You will need to add your own gauge of your choice. These are the same bottle.

Fill pressure 300bar/4351psi compared to 3000 psi fill for standard AF tank. This larger tank is 580cc compared to the standard 480cc size.

This tank can be used with the following guns. FX Dreamline (Bottle adapter needed). Outside diameter 2.4 inches.

Close to one pound lighter than stock AF tank. M18-1.5 thread fits: Air Force Condor, CondorSS, Texan, Talon, TalonSS, Daystate, FX, Rapid, Airguns. All standard accessories will fit this tank. NOT designed for paintball guns.

3,000 PSI Output Pressure - Made for PCP Airgun Applications. Rated for 4,500PSI storage Pressure.

Use this regulator on any 3000psi Compressed Air Tank used for Paintball. It will power your PCP Air rifle with an output pressure of up to 3000 PSI. You can choose an output pressure from 1000PSI up to 3000PSI and anywhere in between (example, 1000PSI, 1100PSI, 1200PSI). THIS IS NOT FOR PAINTBALL. NINJA PCP AIR RIFLE REGULATOR, FOR USE WITH AIR RIFLES. SRT piston -Sonic Recharge Technology piston - plated aluminum piston that produces an industry leading recharge rate and virtually eliminates reg shoot down. MFV - Mini Fill Valve - Non wrist digging, low profile design fill valve. Meets all DOT, CGA and ASTM specifications. Completely rebuildable by the user. Every regulator is hand crafted and factory tested. ASTM COMPLIANT DOT burst disc. ASTM COMPLIANT Low pressure burst disk. ASTM COMPLIANT Restrictor, bleed hole and safety groove.

Regulator installed to ASTM specifications.