GX PUMP CS4 Portable PCP Air Compressor 5 Hours Continous Work Max 5800Psi/40Mpa

  

GX PUMP CS4 Portable PCP Air Compressor 5 Hours Continous Work Max 5800Psi/40Mpa. GX PUMP CS4 Portable PCP Air Compressor, 350W Powerful Motor, Max 5800Psi/40Mpa, Water and Fans Cooling, 5 Hours Continous Work, 12V Auto Stop PCP Air Rifle Paintball Air Compressor. This CS4 PCP compressor has a new upgraded 350W motor, and adopts four-stage compression technology. It is very stable when working, and it is very quiet with only 70db.

At the same time, it is equipped with a double-pointer pressure gauge, and the two-level setting auto-stop pressure, which is more secure. A water tank and a grease tank are designed on the top of the compressor. The excellent cooling can achieve 5 hours of continuous work and can fill a maximum 6.8L gas cylinder. Note: For the first use, it must be filled with 500ml of neutral distilled water (can not contain impurities such as minerals)or antifreeze (PH is about 7). Do not turn the grease knob until after 4-6 hours of use, then turn it one turn. Afterwards, if the speed has slowed down and twisted again. After the break-in period, there is no need to add grease. 15% Faster Filling Speed: Filling 0.5L tank from 3000Psi to 4500psi, only needs 4-5 minutes. Filling 0.5L from 0-4500psi, only needs 14-16 minutes. Filling 6.8 liter bottle from 0-4500psi, 2 hours and 40 minutes. 12V DC input, you can use car battery or household outlet for power supply, equipped with 110V-12V converter. Please read user manual carefully before turning on compressor. Product size: 11.86.112.4 inch, weight: 29lb. ATTENTION: when filling is complete, please release the bottle valve first (when filling bottle) and then open compressor's bleed valve to release line pressure. All pressure must be released from compressor before starting. Pcp air compressor 1, Instruction manual 1, Fitting kit 1, 110v-12V Power Supply1. Voltage: 110V/220V AC voltage or 12V car battery. Cooling system: water cooling system + fan cooling. Continuous working time: 4 to 5 hours. Maximum cylinder capacity: 6.8L. 1, For the first use, it must be filled with 500ml of pure water or antifreeze before turning on power. 2, Do not turn the grease knob until after 4-6 hours of use, then turn it one turn. Otherwise will cause bad performance. 2, Please release the bleed valve first after finishing the inflation, and do not start it when there is still air pressure inside your compressor. No APO/FPO addresses or PO Boxes allowed.

We are not responsible for undeliverable addresses.