4500PSI Air Compressor Pump PCP 30MPa High Pressure System Rifle Airgun Scuba

  
FAST FILLING: It takes only 38 minutes to fill full 6.8L tank to 300BAR, perfect for air impermeability test, pressure proof test, etc. DURABILITY: Alloy air cylinder and high-quality components ensure years of use. PERFORMANCE STABILITY: Designed with two-stage compression and two water-oil separators for performance stability.

COOLING SYSTEM: Please prepare enough cooling water, it is recommended to be a vat of water to achieve better cooling effects. 4500PSI Air Compressor Pump PCP 30MPa High Pressure System Rifle Airgun Scuba.

A single working time cannot exceed 30 minutes, the machine temperature cannot exceed 80 degrees Celsius. If the working time is too long or the temperature is too high, the device will enter the over-temperature protection state, automatic shutdown. If the machine is too hot, automatic shutdown is a normal phenomenon, have a rest after a few minutes the temperature can return to normal, then start again. When the pressure reaches 30MPA / 300bar, the pump will shut down automatically. Working Pressure:300BAR / 30MPA/ 4500PSI.

Working Capability: 50 L / min. Dimension:14.2" x 7.1" x 14.6. 1 x Air Compressor Pump. 1 x Water Cooling Pump.

2 x Pressure Relief Screw. 2 x Power Cables (110V). It takes 12 mins to fill full 1L tank to 300 BAR. 46 Anti-wear Hydraulic Oil (vg46 or aw46). B Damage caused by natural disasters, flood fire, lightning or pollution.

C If item was opened, any parts removed or repaired by any unauthorized person. D If damaged parts are the TFT screen or the screen has less than 3 dead pixels.

The item "4500PSI Air Compressor Pump PCP 30MPa High Pressure System Rifle Airgun Scuba" is in sale since Tuesday, January 19, 2021. This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps". The seller is "newamj26au" and is located in Monroe Township, New Jersey. This item can be shipped to United States.

• Brand: YONG HENG
• Model: YH-QB01
• MPN: YH-QB01
• Air flow rate: 50L/MIN(13.2GPM)
• Type: High Pressure
• Motor Power: 1.8KW
• Cooling System: Water Cooling
• Charge pressure: 30MPA
• Power: 110V 60HZ
• Working Pressure: 300BAR / 30MPA/ 4500PSI
• Inflating Speed: 2800R/Min
• Noise: 78DB (Max.)
• Compression Stage: Two Stage
• Lubrication Mode: Splash Type
• Material of Cover: Cast Aluminum
• Test Inflating Result: It takes 12 mins to fill full 1L tank to 300 BAR
• Oil: No.46 Anti-wear Hydraulic Oil (vg46 or aw46)