4500PSI 30MPA PCP Air Compressor Auto-Stop 250W High Pressure Pump AC 110V/DC12V

  
Inflation Pressure: 30Mpa or 4500Psi Charging Rate: 13min/450cc 0-30Mpa(300bar) Product Size: 241714cm/9.56.75.5inch Package Size: 302626cm/11.810.210.2inch Net Weight: 6.8kg/15lbs Gross Weight: 7.7kg/16.97lbs Package Included 1 PCP Air Compressor 1 Power Converter. It is widely used in diving cylinders, firefighting cylinders, paintball, leak detection, diving cylinder filling, pressure testing, but also for cars, trucks, kayaks, PCP airsoft rifles, paintball, etc.

Material: Aluminum, Copper, Stainless Steel. Cooling Method: Fan Air Cooled. Inflation Pressure: 30Mpa or 4500Psi. Charging Rate: 13min/450cc 0-30Mpa(300bar).

Product Size: 241714cm/9.56.75.5inch. Package Size: 302626cm/11.810.210.2inch. Gross Weight: 7.7kg/16.97lbs. This air compressor can be powered by the 12V car battery but not the car cigarette lighter plug. Do not overfill air gun tanks or air cylinders (less than 1L), as this can cause serious injury.

Never attempt to set the output pressure/auto shut-off above 30Mpa(300 bar). Please let the machine rest for 5 minutes when it continuously operates for 30 minutes.

Do not disassemble the machine without professional guidance. Otherwise, it may lead to damage to the machine. If the machine can not start, you can check and reset, try to restart the power supply, or open the valve to relieve pressure. If the compressor is overheating, you can check the motor rotation direction, wind blades, or cooling water circulation. And continuous working can not exceed 1 hour.

If the pressure can't increase or the inflation time is too long, you can adjust or change the hose/connector, or clean/ change the valve sheet. If the compressor has a strange sound, you can try to adjust or change the bearing. If the machine is smoking, you should turn it off and restart it after it cools down.

If the compressor vibrates strangely, you can try to tighten the screws or change the ground. If the piston and cylinder are jammed, you can try to repair or replace the oil&faulty parts, improve the ambient temperature, or run smoothly to ensure sufficient lubrication. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.

Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount.

Due to time zones, our reply to your questions may not be immediately. If it's non-workdays, please kindly be patient and wait till Monday.