4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

  
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge. The Pumping Efficiency is Increased By 20%. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving.

With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it's made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure.

It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in.

Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 1 x High-pressure air pump. 1 x High pressure hose. (cylindrical filter, sponge filter, hexagonal tool, test plug, car connector, O-ring pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter). The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you have any inquiry regarding the item or our service, We will try to reply any message within 24 working hours.

Emails may not be monitored quickly. The item "4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge" is in sale since Tuesday, June 16, 2020. This item is in the category "Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories".

The seller is "dst_tim" and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.

• Air Tube Length: Approx. 53cm/20.9in
• Brand: Unbranded
• Come with Practical Accessory: For You to Quick & Easy Use
• Connector Diameter: 3.1cm/1.2in
• Connector Length: 9.9cm/3.9 in
• Connector Type: 8MM Female
• Made of High Quality Stainless Steel: Anti-Rust and Durable for Long Lasting
• Material: Stainless Steel
• Model: Four Stage Upgraded PCP Hand Pump
• MPN: Does Not Apply
• Non-Explosive Tube: Imported Material, 63MPA Pressure Resistant Design
• Note: Air Tank is Not Included
• Theory: Reciprocating Pump
• Type: PCP Adapter
• Upgraded Function: The Pumping Efficiency is Increased by 20% Compare to Normal One
• With a Pressure Gauge on it: You Can Know When to Stop Inflating
• With Ergonomic Design: Easy to Pump,Convenient to Operate,Time-saving and Labor-Saving
• With Oil-Water Separator: Make The Gas More ure
• Working Pressure: 0-40MPA (0-6000PSi)