1800W High-Pressure PCP Air Compressor, 4500PSI for Scuba, Air Rifles, Paintball

  

1800W High-Pressure Compressor - Manual Stop for Maximum Control. This powerful 1800W PCP compressor delivers efficient, two-stage compression, reaching a maximum working pressure of 4500 PSI. Equipped with water cooling, an oil/water separator, and an LED temperature display, it ensures stable performance and longevity. Ideal for scuba tanks, PCP air rifles, paintball tanks, and more.

High-Pressure Performance: With a 1800W motor, this air compressor offers rapid inflation with a maximum pressure of 4500 PSI (30 MPA). The inflating rate is 2800 RPM, and it can fill 1 gallon in just 36 minutes. Water-Cooling System: Efficient water cooling ensures optimal heat dissipation.

The machine operates best between 50°C to 70°C, with a max temperature of 75°C. Make sure to change the water every 20-30 minutes for continuous operation.

Enhanced Safety: Equipped with an explosion-proof valve, stainless steel cylinder, and metal protective fences on the front and sides for added safety. Always replace the oil plug with the breathing valve before use. LED Temperature Display: The upgraded LED display allows for clear and easy temperature monitoring.

The durable stainless steel cylinder ensures stable, long-lasting performance. Versatile Applications: Suitable for a wide range of high-pressure uses, including scuba tanks, PCP air rifles, paintball tanks, airsoft guns, firefighting, and more. The water/oil separator filtration ensures clean air discharge. Max Pressure: 4500 PSI (300 BAR).

Dimensions: 14.5 x 7 x 15.7 inches. This high-performance compressor is perfect for all your high-pressure needs, from scuba diving to air rifles and more! 1800W High Pressure Compressor Manual Stop.

The pump is a 1800W PCP compressor with two-stage compression. The maximum working pressure is 4500PSI. When the required pressure reaches, you need to stop the machine manually to avoid dangers. The compressor adopts an oil/water separator filtrating and water cooling system, ensures a stable performance and long service time.

In addition, the compressor features an upgraded LED temperature display, explosion-proof valve, and stainless steel cylinder. Suitable for scuba tank, PCP air rifle, paintball tank, diving bottle, air pistol, etc. : Make sure the lubricant oil has been put in before starting the pump; otherwise, it will cause permanent damage to the machine.

Tough Equipment & Tools, Pay Less. VEVOR is a leading brand that specializes in equipment and tools.

Along with thousands of motivated employees, VEVOR is dedicated to providing our customers with tough equipment & tools at incredibly low prices. This scuba tank compressor features a 1800W high-power copper motor and excellent inflation performance. The maximum working pressure is 4500PSI, the inflating rate is 2800R/min, and the flow rate is 50L/min. When the pressure reaches 30MPA, you need to stop the machine manually.

This PCP air pump is cooled by water and air; it has a fast heat dissipation performance. The working temperature for the machine is 50? The Maximum temperature is 75? Therefore, you need to keep an eye on the device during its running.

When the temperature reaches 75? , replace the water or stop the machine immediately. This scuba compressor is upgraded with durable metal fences in front and beside the machine body. The machine also is equipped with an explosion-proof design, which provides your security in various aspects. Warning: Please replace the oil plug to the breathing valve before starting the machine; otherwise, the device will explode.

The paintball air compressor is designed with a convenient hand grip, effortless to carry and move. However, there is a potential danger of pipe burst or connecting fitting blow-off. Please do not near the compressor when it is running.

Double-check the lubricating oil has been put in before starting the machine. Our paintball pump adopts an LED temperature display, more transparent and convenient than the digital type.

You do not need to worry about changing the battery as there is without battery required. Stainless steel cylinder also provides stable and high-quality performance for you.

Please change the water every 20-30 minutes to avoid the cylinder overheat. This scuba air compressor features oil and water separator filtration. Clean air will be discharged by the machine, suitable for the mini diving bottle, PCP rifle, paintball tank, air pistol, paintball air rifle, fire fighting, leakage detecting, pressure-tight test, air impermeability test, etc. Tank Capacity: 0.66-1.50gal/3-6.8L. Air Flow: 8.8-11GPM(40-50L/min); 1.5-1.8cfm. Air Hose Connection: 0.3in/8mm Quick Connect Fitting. 2 x Pressure Relief Screw.

1 x Spare Parts Kit. : Our PCP air compressor is made of copper wire and a 1800W motor. It can produce high pressure quickly and efficiently with a maximum pressure of 300BAR/30MPA/4500PSI. Please note that you need to stop the machine manually when the required pressure reaches.

: This air rifle compressor adopts a water-cooling system equipped with an LED temperature display. The perfect temperature ranges from 50?

Once the temperature reaches 75? , you must stop the machine and change the water. Note: The water container is not included. : The paintball compressor features an explosion-proof valve, front and side fences, providing you more security.

Attention: To avoid danger, you must use the breathing valve to replace the oil plug before running the machine. : This air compressor is equipped with an upgraded LED thermometer to monitor the temperature. Compared to the digital one, the LED display is more clear and does not require a battery. Moreover, the cylinder is made of stainless steel, which provides the machine a long lifespan.

: The filtration device of the high pressure air compressor is a water & oil separator. The pump discharges clean air, perfectly suitable for scuba tank, PCP air rifle, paintball tank, reservoir, airsoft, fire fighting, and other high-pressure activities.