Pcp Air Rifle

12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car

12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car

12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car    12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car
12V 30MPa PCP Electric Air Compressor Pump High Pressure System Fits Rifle Car. 12V 30MPa 4500PSI Air Compressor Pump PCP Electric High Pressure. The product has you anticipated outstanding quality and convenience. The product is equipped with high pressure rubber hose, to apply to. Superimposed double-cylinder two-stage compression used by this product has the feature of.

Which could be not only used for diving fire cylinder, but also could be used in car, lorry, truck and other automobiles. One machine serves several purpose, with a wide application range. A universal fast connection and charging connector is accompanied with the machine, in addition to inflation bottle, it could also be used for. Cars, motorbike, electric vehicles and other vehicles.

Fire fighting, diving, leakage detecting, pressure-tight test, automobiles, etc. The most important thing is. For high-pressure air guns and household appliances. It can be used not only. The inflation pressure can reach 4500 PSI, and the inflation speed is fast; 2.

The product is light and portable, and. Can be used for outdoor converters or indoors.

The product adopts oil-free lubrication, clean and hygienic, no need for external water pump to cool, easy to operate; 4. Wide range of applications, PCP inflation, car tire inflation, kayaking inflatable, diving oxygen tank inflation, etc.

5mpa or less can work continuously. The product has stable performance and long service life. Electric pump can be used for. Fire fighting, air soft, paintball, leakage detecting, pressure-tight test, automobile tyres, etc. And it is suitable for carrying out when going out during holidays. No need to carry additional cooling equipment. Keep the pump clean and tidy.

Spare parts parts drawings and list. M34 round head hex screw.

M48 round head hex screw. O ring 10 1.5.

M4 4 Low head screw. M6 30 hex Socket Screw. High pressure piston open loop.

M36 round head hex screw. Open the package , read the manual carefully, check the parts list (see sheet 1), if anything missing pls contact with the sales. A number of tests has be done before. Packing , the quick connector and plug have been assembled, the user only needs to turn on the power, dial the start switchsee.

When use the car battery loading , must connect the positive pole to the red wire and the negative pole to the black wire! After turn on the compressor, listen whether there have any abnormal sounds(such as; Friction sounds, uneven movement sounds, leakage sounds) at first, and then check the parts for loose fasteners. And observe the speed of the pressure gauge pointer.

From 0 to 300 bars, it should be about 20 seconds(using the test plug state). Firstly, find the location of the battery position of the car, confirm the positive and negative poles of the battery, and make sure that the compressor is switched off and release the bleed valve. Clip the red clamps to the positive pole or screw, the blue (or black) clamps to the negative pole or screw, then start the car. Pull out test plug and keep it in place. The test plug is the very important component to check and analysis the compressor fault.

Connect the quick connector and check the fitness between the quick connector and the male head (The leakage caused by the unmatched quick connector is the main reason that most of the quick connector cannot be pumped, which can be usually detected with soap water). Toggle the switch to start the compressor, check whether the two cooling fans are working normally.

Tighten the bleed valve and start filling after making sure everything is normal. Please note that the operator should not be too close to the inflatable container during air pumping. Please keep a safe distance. Closely observe the indicated pressure of the gauge. The highest design pressure value of the compressor is 310BARS.

When the gauge reaches the required pressure value, please turn off the switch in time! Then open the bleed valve, drain the air and water, and then open the quick connector.

Pls open the bleed valve, release the moisture, take off the connector with the tank, reassemble the test plug. The clamps on the positive and negative poles in order. Cleaning the surface if the compressor , coil the wire on the machine after the compressor cool down. Pls avoid the compressor scratch with the hard objects when it is in the car ;pls avoid to put the compressor in the wet area;place the compressor upright.

Household electric appliance:please use our specified voltage converter which has a slide switch and 110V & 220V indicator on the side, and. To the right indicator according to the applicable voltage where used. The voltage converter shall be damaged by error operations. After the voltage confirmed, the compressor power cable to be clipped first, and then the red cable to be connected to positive pole, and blue or black cable to be connected to the negative pole. Please switch on the plug, and start the machine after the indicator light in the voltage converter is on.

The operation to be as per the procedure of aforementioned No. When stored, please firstly pull out the plug and then stored as per storage procedure No.

The internal mechanical parts of the machine are lubricated with grease. After using the machine for 50 hours, need to add some grease in. Add method: open the oil plug (# 51) with a wrench, and the machine is powered on. Turn on and off the power switch frequently to stop the machine at the position shown in figure 4. Add some grease to the high pressure rod no.

77 with the syringe (it is forbidden to add grease when the machine is working), after the high pressure rod is added. Turn on and off the power switch frequently again to stop the machine at the position shown in figure 5 and figure 6.

Use the tip of the syringe to support the threaded hole on the connecting rod pin (52#) and add grease. Then add some grease to both sides of the connecting rod pin. Install the oil plug and the machine will work normally. When the machine is working for 100 hours, clean or replace the filter cotton (61#) in the handle.

When the machine is used for a long time and the gas at the air outlet is found to contain impurities, please replace the filter cotton (27#) in time. Our package is equipped with grease. Our products generally do not require lubrication paper for 2 years.

Sorry for our manual did not improve the information in this regard in time. No APO/FPO addresses or PO Boxes allowed. We are not responsible for undeliverable addresses.

The item "12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car" is in sale since Friday, October 11, 2019. This item is in the category "Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories". The seller is "motors24online" and is located in Monroe Township, New Jersey. This item can be shipped to United States.

  • Maximum electric current: 25A
  • : 1
  • Noise: MAX 75DB
  • Size: L21 * W12.5 * H24 CM
  • Custom Bundle: No
  • Wattage: 600W
  • UPC: Does not apply
  • Material of Cover: Cast Aluminum
  • MPN: Does not apply
  • Charge pressure: 30MPA
  • Working Pressure: 300BAR 30MPA 4500PSI
  • Power Type:: Air Compressor Pump
  • Voltage: 12V / 110V / 220V ( add AC transform DC)
  • Air flow rate: 8L/min
  • Non-Domestic Product: NO
  • Inflating Speed: 2700R/Min
  • Lubrication Mode: Lubrication
  • Weight: 6.7KGS
  • Modified Item: No
  • Cooling System: Automatic cooling (No water Cooling)
  • Brand: Mightpower
  • Type: Air Compressor Pump
  • EAN: Does not apply
  • GTIN: 864432327285
  • Model: 12V 50A 600W
  • Power: 12V 50A 600W


12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car    12V 30MPa PCP Electric Air Compressor Pump System High Pressure For Rifle Car