Product Description SCU60 Portable Air Compressor is an ideal choice for shooting enthusiasts. The compact dimensions and light weight make it very easy to transport and operate, strong security and reliability. This Pump can be used to fill the tank for PCP Air Gun Paintball Tanks, but do not recommed to filling the tanks which capacity greater than 6 Liter.
Technical Parameter - Discharge rate: 60L/min - The inflation rate: 0.5L container 30MPa about 2-5 minutes, 1L container 30Mpa about 10-15minutes. Pressure system: Manual stop with Imported safety valve, automatic leaking after full filling. Application: PCP Rifle Airgun Paintball Tanks - Dimension: 370x360x490 mm /14.6x14.2x19.3 inch - Weight: 27kg Packaging list 1x Air Compressor 1x DIN Transfer Hose 1x Power Cord come with NEMA 20A power plug 2x White Hoses for Cooling 1x Set of Spare Parts Note. The machine must not be working without lubricate oil, so you must pay attention to the level. Please add lubricating oil before you start using the machine first time Lubricate oil recommend: Mobil Rarus 824, 826, 827, 829 or ISO 100/150, SAE 40/50.
When running, if the machine vibrates violently, please add pad or towel under the compressor 4. When the compressor working, the cooling pump system must be working at the same time. Filling tank and the oil are not included in the package.Great little compressor, pumps my Air Force Condor up from 1k to 3k in just over 3 minutes and shuts itself off. Have to do a few trial runs to get the shut-off set just right but simple.
Pumped up my new gauntlet with larger installed tank in 2 -1/2 minutes. Haven't used it a whole lot yet, still pretty cold here in Michigan. I'll be putting it thru it's paces when I start shooting more , we have several guns to fill when time comes but so far works great. It does vibrate when running and will walk around a bit so be prepared for it. Also connecting water line to pump takes a little bit of patients but can be done.
Directions are a bit cryptic, but a very nice product so far and relatively quiet. Filled the crankcase with oil, setup a 2 gallon cold water bath (75 degrees F) for the compressor cooling, and began filling an empty 77ci 4500psi Ninja paintball bottle.
Filled the bottle to 4500psi in about 15 minutes, quite remarkable! The item "High Pressure Air Compressor for Paintball PCP Airgun Rifle Scuba Tank Filling" is in sale since Wednesday, August 1, 2018.This item is in the category "Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Air Compressors & Blowers\Other Air Compressors". The seller is "fesin2018" and is located in CA. This item can be shipped to United States.